• Axial thrust :
•    1500 N from 0.37kW to 2.2kW
•     2500 N from 2.2kW to 5.5kW
•     5000 N from 2.2kW to 5.5kW
•    7500 N from 2.2kW to 7.5kW
• Other Voltage and frequencies available upon request.

4" Encapsulated Submersible Motor

Technical Features:

• Encapsulated resin filled stator.
• Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap
• Moter Case: SS 304.
• Motor Shaft: SS 304.
• Shaft end and coupling: NEMA Standard
• Kingsbury thrust bearing.
• Winding: enameled copper - class F insulation.
• Degree of protection IP68/Class B insulation.
• Max temp. 35degree with water cooling flow min. 0.08 m/s.
• Max depth immersion: 150m.
• Nos of start per hour: max 30 at regular intervals
• Labyrinth seal, sand slinger and lip seal.
• Coolant: water and propylene glycol.
• Motor cable lenght: 1.75 to 4 m according motor size (3 wires plus ground).
• Voltage variation: +/-10%.
• Single phase motor available in both version CSCR & PSC.
• Suitable for horizontal operation.

Motor range versions :

• Single Phase : 0.37kW (0.5hp) to 4kW (5.5hp), 220-230V / 50Hz (or 60 Hz).
• Three Phase : 0.37kW (0.5hp) to 7.5kW (10hp), 380-415V / 50Hz - 460V / 60Hz.

Motor range versions :

• Single Phase : 0.37kW (0.5hp) to 1.1kW (1.5hp), 220-230V / 50Hz (or 60 Hz).
• Other Voltage and frequencies available upon request.

4" 2 wire Encapsulated Submersible Motor

Technical Features:

• Encapsulated resin filled stator.
• Build in electronic starter.
• Build in Thermal overload.
• Build in Lightning arrestor.
• Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap
• Moter Case: SS 304.
• Motor Shaft: SS 304.
• Shaft end and coupling: NEMA Standard
• Kingsbury thrust bearing.
• Winding: enameled copper - class F insulation.
• Degree of protection IP68/Class B insulation.
• Max temp. 35degree with water cooling flow min. 0.08 m/s.
• Max depth immersion: 150m.
• Nos of start per hour: max 30 at regular intervals
• Labyrinth seal, sand slinger and lip seal.
• Coolant: water and propylene glycol.
• Motor cable lenght: 1.75 (2 wires plus ground).
• Voltage variation: +/-10%.
• Single phase motor available in both version CSCR & PSC.
• Suitable for horizontal operation.